OpenScope Case - V2

This is to support the OpenScope Kickstarter!

Here is the 3D printable case for your OpenScope. This case was designed to secure your board with a simple Snap-On feature, and giving you the freedom to still access the buttons and connectors.
There is version 1 on the web, but be sure to download version 2, since we have made the necessary adjustments to secure the case with the most recent upload.

The STL files were exported in millimeters, so be sure to check this setting in your slicer when your importing.

For best results, print with the following settings:
Nozzle Diameter: 0.4 mm
Layer Height: 0.1 – 0.12 mm

If you wish to print with a mirror finish on the top and bottom surface, you would need to print on a glass bed with either glue stick or hairspray for the adhesion. If your slicer provides options to adjust the first layer settings, these are the settings that worked best for us:
First Layer Height: 80-100%
First Layer Speed: 35-40%
First Layer Width: 100-11