Ottoman Hinge

This model is to repair a hinge for our ottoman. The countersunk holes fit a #6 screw pretty well. A #8 will protrude slightly from the top. I used #6 ¾ inch length screws to secure the right angle leaf to the side wall and #6 ½ inch screws to secure the flat leaf to the top of the ottoman. The dimensions of the ottoman we have are: The side wall is ~20 mm thick.The top cover's inner board is about 20 mm as well. I superglued the caps onto the sides of the pin. Note: The right angle leaf is weak against rotation across the screw hole locations that lay against the top of the side wall (because those parts were printed on the z axis). So just be careful when attaching the top of the ottoman (I broke one of the leafs doing this). I included the step file and tried to create user parameters for dimensions if you need to make modifications.