Outdoor lantern with E27 fitting Hexagonal shape

We were looking for a few lights in our tree, but all we could find were solar led lights.All a bit the same, so the challenge was to make our own, in the design we like..This is one off them.. I made 4 designs in total. In short about the design: This one has a cord and you can screw in a led of your choice with an E27 fitting.There is space above the fitting to apply insulation gel to make it waterproof.I used “Wondergel,” which remains elastic and does not harden.It is really important that you make sure the hole cavity is filled with the product you use to make it waterproof!The lantern is based on Moroccan style.Between all parts is thread so its easy to assemble.In the top is a small hole to secure the cable so the weight is not on the wires but on the outside of the cable.Likely you have to taper the hole to the size off thread you want to use.Only the bottom part is glued.It has a narrow rim that falls in the middle part for easy positioning.The E27 fitting is standard, noting