Owl

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150x150mm in size. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct.  You may print at higher layer heights below the Base Thickness of 0.56mm, The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.8mm Filaments Used: PLA Elegoo+ Black Transmission Distance: 0.3 PLA Elegoo + White Transmission Distance: 7 This print uses 2 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to White for the rest.