Owl

Just an owl. The frame is made with frame generator for HueForge by Girouxra.https://makerworld.com/en/models/514362#profileId-430525 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x109.69mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Filafarm Gorilla Black Mat Transmission Distance: 0.3 PLA PolyTerra Fossil Grey Transmission Distance: 0.3 PLA Prima Value Light gray Transmission Distance: 5 PLA PolyTerra Cotton White Transmission Distance: 1.5This print uses 4 unique filaments Swap Instructions: Start with Gorilla Black Mat At layer #12 (1.04mm) swap to Fossil Grey At layer #18 (1.52mm) swap to Light gray At layer #23 (1.92mm) swap to Cotton White for the rest.