Package opener

This is my package openerUse it to open parcels and packages by cutting the tape or even to open letters with your own 3d printed tool!Bring some interesting tool to your office desk to start conversation with your colleagues or just use it at home. Recommended filament: PLA+ or PLA CFHotend: 0,40mm Print instructions:layer height 0,20mm3 wall loopsenable “detect thin walls”top/bottom shells 4 layerstop/bottom shell thickness 0,80mmsparse infill 20%sparse infill pattern “gyroid”outer layers speed: outer wall 100 mm/sflush options: flush into objects infillBefore printing, make sure your build plate is clean and apply some adhesive. Wash the build plate with oil free soap and wipe it off with some paper towels. For build plate adhesion, apply a thin, even coat of your preferred adhesive. I repeat the process every 5-6 prints.Bad build plate adhesion is not related to the model. Please check out my other models https://makerworld.com/en/u/1597610120Boost MePlease leave me a like and a de