Slicer Discord
Packet Squeezer Tool – 3D-Druckmodell von Thingiverse Thingiverse

Packet Squeezer Tool

von DDStarkey
22 Downloads
20 Likes
0 Makes
Zum Modell
This is a tool that is designed to squeeze liquid filled packets in an orderly fashion. Place the packet edge in the squeezer (for example, a mac-n-cheese packet) and give it a slight turn, cut off the corner opposite the key. Then turn the key to squeeze all the contents out. The packet will turn slightly and bring the cut corner even with the two rollers as you turn it. Yes, you can just use your fingers but this is more fun and does a better job of squeezing.

You need the following parts.
1) Key, 2) Small Ends, 2) Large Ends, 1) Handle, 2) Rollers and 4) #0-80 x 1/2" Long Socket Head Cap Screws or similar to bolt it together.
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen