Paddle Switch Mount

This mounts a paddle or toggle switch on a drop handlebar within easy reach of the hoods and drops. It can be used for electronic shifting or electronics control with a momentary switch, or it could be used for lighting with a latching switch.

I use it with a momentary SPDT switch on my Archer Components [MFR Drop bar remote](https://archercomponents.com/collections/shifters-and-remotes/products/d1x-trail-shifter-mfr-drop-bar-remote) for easy electronic shifting.

It mounts on top of the bar tape and is held on by a common rubber O-ring or rubber strap left over from a computer or light mount. It will fit at least a 4mm wide O-ring. Garmin recommends using only EPDM O-rings for their mounts. Nitrile/buna-N O-rings are more susceptible to UV and ozone damage and probably should not be used. Viton O-rings might be fine for this application.

This mount fits a paddle switch approximately 13mm wide and 7mm deep for a 6mm (1/4") panel mount hole. Search under "toggle switch" on Digik