Pan Holder

Inspired by "Pan Holder" by barkbathory.Since my A1 Mini is too small to print the original, I recreated the pan holder in Fusion 360 to fit my printer.The distance between the beams is 60 mm. Multiple units can be linked together. I also designed (optional) end pieces to improve the appearance, as in my kitchen, the pans are stacked on the countertop. Additionally, I adjusted the "couplings" of the beams. Depending on your printer and material, it may be necessary to adjust the coupling surfaces in your CAD software to ensure a snug fit. With my A1 Mini using eSun PLA+ and standard settings, no adjustments were needed (but some force is required to connect the parts).To prevent slipping, you can glue something like foam rubber underneath. The project consists of the following parts:Beam (2 per unit, forming the frame)End piece (optional, 2, can be attached at the ends of the frame)Bar (5 per unit, connecting the beams horizontally and holding the pans vertically)STEP f