Slicer Discord
Pantograph – 3D-Druckmodell von Thingiverse Thingiverse

Pantograph

von Kaslayne
137 Downloads
85 Likes
0 Makes
Zum Modell
A Pantograph is a drawing aid that simplifies the enlarged copying of pictures or figures. It makes a great educational toy for families with children, or for people who are into craft activities like patchwork, woodworking, modelling, etc.

The Pantograph is shown set up for threefold expansion (note that when the set up is correct Arms A and C are parallel and Arms B and D are also parallel - you will know if it is wrong as it will not move). Pivots 1 and 2 are permanent and do not need to be undone. Pivots 3 and 4 are moved to select the magnification required ( x3, x4 or x5 ) - the nearer Pivot 2 is to the anchor point the greater the expansion.

Using the pantograph is simple. The drawing surface should be about 60cm square with the anchor point located in the bottom left hand corner and taped down. With the pantograph in its closed position, the picture to be copied is placed so that the tracing point (pivot 2) is just on the left hand bottom corner of the picture and the pic
Quelle
Thingiverse
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, Wood PLA
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen