Thingiverse
Parametric Enclosure
por eccnil
11
Descargas
3
Likes
0
Makes
Parametic box
Minimimalistic with no screws
Designed as a flat base with a small raised bell to stick your project with hot glue or doble sided adhesive tape.
If you have some project with for example a circuit, you can adjust the size of the box to enclosure it. The project is open so is up to you make the holes you may need (leds, inputs, cables, etc) in the design or in the printed part with actual tools.
You need freecad to modify parameters. All parameters are in the internal spreadsheet. Green parameters are those you should change.
Minimimalistic with no screws
Designed as a flat base with a small raised bell to stick your project with hot glue or doble sided adhesive tape.
If you have some project with for example a circuit, you can adjust the size of the box to enclosure it. The project is open so is up to you make the holes you may need (leds, inputs, cables, etc) in the design or in the printed part with actual tools.
You need freecad to modify parameters. All parameters are in the internal spreadsheet. Green parameters are those you should change.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
