Thingiverse
Parametric peg
von pyror
6
Downloads
1
Likes
0
Makes
A simple split peg with a hole in it. I designed it for attaching a 12mm RC motor mount (7mm thick) to a 6mm carbon fiber tube which is in 90 degrees angle. The default settings are for this use.
As this can be useful for many other purposes as well, I decided to share it here. I'd be happy to hear which kind of use you find for it.
(With an RC motor mount, be careful that the peg doesn't roll too easily with motor torque. I ended up needing CA to keep it still. Carbon tube and abs are both quite slippery.)
As this can be useful for many other purposes as well, I decided to share it here. I'd be happy to hear which kind of use you find for it.
(With an RC motor mount, be careful that the peg doesn't roll too easily with motor torque. I ended up needing CA to keep it still. Carbon tube and abs are both quite slippery.)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
