MakerWorld

Other Tools

Parametric Spring (Customize)

von Marc · Other Tools

13 Downloads

6 Likes

6 Makes

Parametric SpringGenerate a customizable, parametric flat spring as a 3D model using your own spring specifications.CustomizerUse the [Customizer] to set your own parameter settings for the properties of the spring:SpringHeight / Z-axisLine thicknessWidth / X-axisSteps (length of the spring)Number of stepsGap size between stepsEnds (start and end of the spring)Default, half, or full widthRounded ends (yes/no) [ ! ] WarningSet the seam position to “Back” to avoid any weak points in the center of the spring. What I usedPrinterBrand: Bambu LabModel: H2CNozzleName: H2C Induction Hotend (Right)Type: Hardened SteelDiameter: 0.4mmFlow: StandardFilamentBrand: SUNLUMaterial: PETGDiameter: 1.75mmFlow: Super SpeedTexture: MatteSettingsProfile: 0.08mm High Quality @BBL H2C (default)ChangesQualitySeamSeam position: BackScarf around entire wall: ✅IroningIroning Type: Topmost surface<

customize custom parametric spring 3D adjust OpenSCAD openscad scad SCAD parts part customise customization customisation script DIY diy modify modifiable

Kategorie

Other Tools

Quelle

MakerWorld

Veröffentlicht

24.01.2026

Aktualisiert

03.05.2026

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PETG

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Parametric Spring (Customize)

Ähnliche Modelle

Zur Sammlung hinzufügen