Parametric-switch-holder
door qwelyt
64
Downloads
53
Likes
0
Makes
A parametric switch holder. Could be used to create a switch tester or lubing station or what ever you might come up with.
Latest source can be found on github: https://github.com/qwelyt/Parametric-switch-holder
---- Update 2, 2019-08-25 ----
Add support for ALPS switches.
---- Update 1, 2019-08-24 ----
Updated the SCAD file with new default values to support Kailh, added legs option, added puzzle option.
Legs: If you want to use less material when printing you can now opt to
use a thinner case but add legs to lift it up from the ground to have
the switches not touch the floor.
Puzzle: Ever wanted to make a MASSIVE switch holder but don't have a
MASSIVE printer? Print it in pieces and lay them in a puzzle! You can
glue them together if you want them to stick like that, or just hook
them in temporary.
Kailh: The Kailh box switches do not have the same side cuts as Cherry
or Gateron. This meant that the default values made it difficult to put
the Kailh switche
Latest source can be found on github: https://github.com/qwelyt/Parametric-switch-holder
---- Update 2, 2019-08-25 ----
Add support for ALPS switches.
---- Update 1, 2019-08-24 ----
Updated the SCAD file with new default values to support Kailh, added legs option, added puzzle option.
Legs: If you want to use less material when printing you can now opt to
use a thinner case but add legs to lift it up from the ground to have
the switches not touch the floor.
Puzzle: Ever wanted to make a MASSIVE switch holder but don't have a
MASSIVE printer? Print it in pieces and lay them in a puzzle! You can
glue them together if you want them to stick like that, or just hook
them in temporary.
Kailh: The Kailh box switches do not have the same side cuts as Cherry
or Gateron. This meant that the default values made it difficult to put
the Kailh switche
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
