Parkflyer 400 GT

A very agile copter designed for propellers up to 8".
Parts can be found here: https://www.parkflyer.eu/store/400-gt-parkflyer/
The building instructions will follow.

Update:
- Manual was added
- Small but nice, the middle screw channel of the top center plate was slightly reduced, so common 4S LiPo fit better in the battery compartment. (400GT-topplate-center_V2.stl)

Recommended set up:
1400 KV Motors
20 A ESC
4s LiPo 2400 mAh (minimum 3S)
7-8" Propeller

Canopeys can be found here:
https://www.thingiverse.com/thing:2335529
https://www.thingiverse.com/thing:2335535

Screw-Set Frame:

M3 x 50 mm Hex Screw, 8 pcs.
M3 x 10 mm Rivet Nut Aluminium, 8 pcs.
M3 x 30 mm Hex Screw, 4 pcs.
M3 x 10 mm Hex Screw
M3 Lock Nut, 6 pcs.
Flat Washer for M3 Screw, 20 pcs.


Motor mount Flat:

M3 x 25 mm Hex Screw, 16 pcs.
M3 x 20 mm Hex Screw, 4 pcs.
M3 Nut, 20 pcs.
Flat Washer for M3 Screw, 40 pcs.

Motor mount Raise: