parrot clock

Project: orologio pappagalli.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 220x220mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA+ esun pine green Transmission Distance: 0.1PLA xing pink Transmission Distance: 5.2PLA creality grey Transmission Distance: 0.3PLA sunlu blue Transmission Distance: 2.1PLA PolyLite Grey Transmission Distance: 1PLA+ esun bordo Transmission Distance: 2.7PLA Overture Orange Transmission Distance: 7.1PLA+ esun gold Transmission Distance: 3.6PLA generic white Transmission Distance: 6.1This print uses 10 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to pine greenAt layer #10 (0.88mm) swap to pinkAt layer #12 (1.04mm) swap to greyAt layer #13 (1.12mm) swap to blueAt layer #15 (1.28mm) swap to GreyAt layer #20 (1.68mm) swap to bordoAt layer #22 (1