PCB Clamp

Needed a good PCB Clamp that could be modified for larger size PCB's like Motherboards so here's what I decided to make.

Openscad files for these STL's are available from:
https://github.com/Dragnsbld/3D-Files/tree/master/PCB%20Clamp/Openscad%20Files

The base holes for the legs should be drilled to ensure they are a 6mm diameter and the pins on the legs need to be filed to a snug fit when inserting them into the base.

The Base, Connector Arm, Slide Arm Connector, Slide Arms, and the Spacer are all created with 5 mm thread but can be tapped to ensure a clean fit.

The photos are of the final product minus the Spacer, I decided it would be good to add the spacer on the thumbscrew used on the Connector Arm so it can tighten the ball joint sufficiently. Make sure the thread for tightening the Connector Arm is good so the arms stay in position or use a nut on one side, I chose to thread one side which seems to work well.

You will need to the following additional parts for th