Peak Design Capture v3 Spacer

IntroductionThis 2mm-thick spacer allows you to attach the Peak Design Capture v3 camera clip to thin straps without the bolt protruding through the backside and into your clothing/body. It features a hole that prevents it from separating from the clip when attaching/detaching Capture clip to your strap. It also has keying to keep it perfectly aligned at all times. Fully seated, the standard bolt would protrude only ~0.4mm, so even the thinnest straps would work fine. Using it with other bolts (e.g. the Peak Design-supplied long bolts) will also reduce the protrusion by 2mm. Note: If you want to add eyelets to your Capture clip (to attach the Capture clip to a strap for example), check out this Eyelet Adapter: https://makerworld.com/en/models/1747408-peak-design-capture-v3-eyelet-adapterUsagePrint the spacerDisassemble the two halves of the Peak Design Capture clip by loosening the button-side bolt and removing the fixed-side bolt.Align and press the spacer onto the back of the Capture