Thingiverse

Peanuts Logo

by reddadsteve

22 Downloads

68 Likes

4 Makes

Peanuts Logo.

This logo can be used along with all my previous Peanuts models to create a complete display.

The main logo is meant to be printed with color changes and is one single STL file. The stand is printed separately and glued to the logo.

Enjoy!

Print instructions
Start with a white color and then color changes as follows:

Layer height 1.0mm change to black

Layer height 1.8 change to yellow

Following are the filaments I used:

White: Overture - PLA, White

Black: Devil Designs - PLA, Black

Yellow: Devil Designs - PLA, Bright Yellow

I've included a Prusa Slicer 3MF file (excluding the base) that I used for this print with the color changes needed for the main logo.

Included is also a zip of parts (excluding the base) that can be used with the MMU/AMS/Palette.

Source

Thingiverse

What you need to print this: Beginner Low confidence

Why?

2 colors

Single piece 2 colors / AMS

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer