Peanuts Nativity Violet

DescriptionLarge cutout of Violet from Charlie Brown dressed as an angle. RequirementsSingle AMS system for full colorAssemblyCan be used with or without the stand depending on your needs. Simply press the pegs into the model to hold them tight. The pegs are designed to be tight so that the parts are held snug. They may be too tight depending on the calibration of your printer. If they are to tight feel free to drop the size by 2% increments until they fit. Make sure the peg infill is high as a lot of the model strength comes from the pegs. If you don't want to use the peg you can always glue the pieces together and it works just as good, some times even better but harder to store. Note: A new peg design was used for this model and should be a lot easier to use without them needing to be as tight. The pegs now click into place and lock into groves inside the holes. They can still be removed by giving them a good tug. Also depending on the filament you use for the skin, some people