MakerWorld
2D Art
Zum Modell
Peared View - hueforge
18
Downloads
21
Likes
7
Makes
Peared view into sculpture and roses. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT You may print at higher layer heights below the Base Thickness of 0.72mm The Max allowed Thickness is 3.12mm and the Actual Thickness is 2.72mm Filaments Used: #000000 PLA Sunlu Matte Black Transmission Distance: 0.1 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #8e9089 PLA BambuLab Basic Gray Transmission Distance: 2 #ffffff PLA sunlu white Transmission Distance: 6.8 This print uses 4 unique filaments Swap Instructions: Start with Matte Black At layer #10 (0.88mm) swap to Blue Gray At layer #18 (1.52mm) swap to Gray At layer #25 (2.08mm) swap to white for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
