Pegboard Tray

This tray is designed to hang on a steel pegboard using my custom mounting system and includes two print options: 🧱 Two-Piece Version (Recommended) The tray is split into top and bottom pieces so you can use your slicer to turn the bottom panel into a honeycomb-grid surface instead of a solid layer. To enable this effect:  1. Import both STLs into your slicer  2. When prompted, select “Yes – import as one part with multiple pieces”  3. Select the bottom panel  4. Set top layers = 0 and bottom layers = 0  5. Set infill to 10–15% honeycomb This creates a lightweight but strong patterned base and saves material. A ready-to-use print profile is included with this setup already applied. 🧱 One-Piece Version A solid STL is also included for anyone who prefers a standard bottom surface or wants a simpler print. Notes:  • Fits standard steel pegboard hook spacing  • No supports required  • Works great for screws, soldering tools, hobby parts, etc. Recommended Print Settings:  • Material: PLA, PETG, or ABS  • Layer height: 0.2 mm  • Infill: 15–25% (or 10–15% honeycomb if using split method)