Pegscape - Large Tool Holders

Pegscape - Large Tool Holders Note: This collection fits pegboards 3/16 inches thick with 1/4 inch holes on 1 inch centers. This is what you'll commonly find at home improvement stores (at least in North America). Strong hangers for your larger tools like hammers, drills, sledge hammers, and more. There are both curved and straight options, and a couple of pre-defined widths or just print two singles and adjust as needed.What to printThe singles only need a #1 peg. The rest need both #1 and #2. If you use the provided print profiles, this is all figured out for you with everything you need on each plate. The short and long pegs are interchangeable. If you want a little extra strength and stability you can use the long ones. The 50mm deep hangers were designed for the short ones, but either will work.InstallationThe pegs slide into the back of the hangers. Make sure to push them all the way up to the top, they'll lock in place when in the right position. Check out the entire Peg