petSD+ Case

This is a 3D printable case for the petSD+ that resembles the Commodore 8050 disk drive.

It consists of a base, top, back and 3 switches. The LEDs on the petSD+ should be replaced with the ones listed bellow (or similar), and light pipes used for better visibility of the lights. No glue is necessary to assemble. You will also need 4 screws to attach the petSD+ PCB to the base of the case.

Here are the assembly instructions I provide when selling the kit:
https://drive.google.com/file/d/1H0cVFVp0PuOAxga5Zh5Lntj_Px1mk4bz/view

Red LED:
https://www.mouser.com/ProductDetail/Kingbright/WP934EW-ID?qs=58z0TXQGVSREwhtC362Hmw%3D%3D

Green LED:
https://www.mouser.com/ProductDetail/Kingbright/WP934EW-GD?qs=58z0TXQGVSTZ3lOkUk8wEA%3D%3D

Yellow LED:
https://www.mouser.com/ProductDetail/Kingbright/WP934EW-YD?qs=58z0TXQGVSTXPMH%252BlghI5A%3D%3D

Light Pipe:
https://www.mouser.com/ProductDetail/Dialight/515-1301-0125F?qs=rkevp0fsrtukVNX7mAM1Mg%3D%3D

I also used the following rubb