Phoenix - Hueforge

This is a FIVE color print. Scale on X/Y axis only. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 166.67x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA Kingroon Black Transmission Distance: 1.6 PLA Kingroon Red Transmission Distance: 5.6 PLA Sunlu High Speed Orange Transmission Distance: 5.6 PLA Sunlu High Speed Yellow Transmission Distance: 6.4 PLA Kingroon White Transmission Distance: 7.2 Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #20 (1.68mm) swap to Yellow At layer #22 (1.84mm) swap to White for the rest.