Phoenix

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Can be printed with manual filament change only (setting filament change or pause in the slicer). No automatic material system required. Model size is 180x180mm. You can scale it, but only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.16mm and the Actual Depth is 2.16mm. Filaments used/color setting: PLA Anycubic Black Transmission Distance: 0.3 PLA Anycubic Orange Transmission Distance: 5.2 PLA Elegoo + Yellow Transmission Distance: 4 PLA Anycubic White Transmission Distance: 6.5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Orange At layer #16 (1.36mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest.