Photography LED Light Diffuser

IntroductionIf you combine PETG Translucent with Vase Mode and Fuzzy Skin, you can get some really quick (10-15 seconds per 1mm of length) and easy to use diffusers! The bigger ones diffuse more and in a bigger arc and the flatter ones are more directional.Filament and Filament ProfileI used Bambu Lab Clear Translucent PETG as it changes the light colour the least. I find that natural PLA changes the colour temperature too much and “cold white” PLA blocks too much light. Clear PETG is cheap, easy to find and easy to print. I also think the frosted look is quite pleasant to look at. I had good results with the following filament settings on the P2S:Nozzle Temperature: 270 °CMax Volumetric Speed: 16 mm³/s (up from the default 6 mm³/s, still using the standard 0.4mm nozzle)Flow ratio 0.99 (increased from the default 0.95 to counter the slight under-extrusion from the higher volumetric speed)Fan speed 30%Disable “Slow printing down for better layer cooling"I've printed all of my di