Pi camera

Raspberry Pi zero W based camera housing.
I used a 40mm (internal measurement) PVC pipe from an old telescope.
The approximate length is 10-12 cm. This can also be printed, do not forget to add a hole for the wire!
Solidworks files are provided for modification.
Note that 2 front panels are provided for the conventional pi camera and the wide angle camera.
Ventilation can be improved by trimming the corners of the 30x30 fan and gluing it to the back plate. The ventilation will be more efficient at the price of the total length of the box.

Due to the small size of the box, the power supply wires are connected directly to the GPIO pins

Do not forget to glue a cooling radiator on the chip of the rapberry pi zero W.

I use the excellent Motion_eye software
https://github.com/ccrisan/motioneye/wiki
(or Motioneye OS)
https://github.com/ccrisan/motioneyeos/wiki

Note that in the pictures, the front panel is not correctly inserted. (Weather is too hot... I'm too lazy to ta