Thingiverse
Pi TFT plus Console Case
von arcmatt
1.3k
Downloads
901
Likes
11
Makes
The AstroBox Touch has got me excited: [Kickstarter](https://www.kickstarter.com/projects/astroprint/astrobox-touch-a-powerful-touchscreen-for-your-3d "Kickstarter") or [AstroPrint](https://store.astroprint.com/collections/accesories/products/astrobox-touch-a-powerful-touchscreen-for-your-3d-printer-pre-orders "AstroPrint Preorder")
So I made a case for a Raspberry Pi (3) and an Adafruit 3.5" TFT in a console style.
The Console consists of 3 parts: The Base, The Body and the Top or screen bezel. I used embedded nuts to bolt the parts together and for mounting the Raspberry Pi. The voids for the nuts are in the STL files, simply pause at the layer height and place the nuts then resume printing.
There are choices for the Base, some are enclosed and some an open frame. Both have options for a 40mm fan. The fan mounts below the Raspberry Pi, but there is an air duct that directs air flow over the top of the Pi as well.
The Body and Top should be rotated 45º to sit flat on y
So I made a case for a Raspberry Pi (3) and an Adafruit 3.5" TFT in a console style.
The Console consists of 3 parts: The Base, The Body and the Top or screen bezel. I used embedded nuts to bolt the parts together and for mounting the Raspberry Pi. The voids for the nuts are in the STL files, simply pause at the layer height and place the nuts then resume printing.
There are choices for the Base, some are enclosed and some an open frame. Both have options for a 40mm fan. The fan mounts below the Raspberry Pi, but there is an air duct that directs air flow over the top of the Pi as well.
The Body and Top should be rotated 45º to sit flat on y
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!