Thingiverse
PiCamZero
par tropho
5
Téléchargements
2
Likes
0
Makes
Camera case for a Raspberry Pi Zero
The "front" piece is designed to fit a Raspberry Pi camera with a motorized IR cut filter (to switch between day and night vision modes automatically) and wide angle lens. Search for "IR cut raspberry pi camera" on Amazon to find various models.
The "back" piece can be secured with small screws to seal everything up, and if the camera will be used outdoors I recommend adding some marine-grade silicone sealant around the edges of each piece to make it watertight. I've used my Pi cameras outdoors for years at a time without moisture getting into the case, though they have been mounted under the edge of a roof and not directly under rain.
You can insert a #4/20 nut into the slot at the bottom to make it compatible with tripods and camera mounts with standard tripod threads.
The "front" piece is designed to fit a Raspberry Pi camera with a motorized IR cut filter (to switch between day and night vision modes automatically) and wide angle lens. Search for "IR cut raspberry pi camera" on Amazon to find various models.
The "back" piece can be secured with small screws to seal everything up, and if the camera will be used outdoors I recommend adding some marine-grade silicone sealant around the edges of each piece to make it watertight. I've used my Pi cameras outdoors for years at a time without moisture getting into the case, though they have been mounted under the edge of a roof and not directly under rain.
You can insert a #4/20 nut into the slot at the bottom to make it compatible with tripods and camera mounts with standard tripod threads.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
