Pikachu Evolution - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 116x170mm in size PLA Black PLA BambuLab Basic Red PLA BambuLab Basic Sunflower Yellow PLA White This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Red At layer #16 (1.36mm) swap to Sunflower Yellow At layer #22 (1.84mm) swap to White for the rest.Frame Version: At layer #29 (2.40mm) swap to Sunflower Yellow for the rest. Check out my other Pokémon-themed projects here! For those who don't have an AMS or only have one, and the project uses more than four colors, you just need to replace the color changes with pauses and switch the filament manually. If you wish to enlarge this project, you can freely scale the X and Y axes. However, it is crucial to keep the Z height at 100% (do not change it). This ensures that the filament color swaps remain at the correct layers; changing the height will break the color sequence and ruin the final result. Bo