Thingiverse
Pin Blocker
door Naomiiiiiiii
3
Downloads
2
Likes
0
Makes
**__Ko-Fi:__** [https://ko-fi.com/juliettaexpress](https://ko-fi.com/juliettaexpress)
---
Quick and dirty OpenSCAD model that lets you 3D print a physical obstruction that will do one of two things:
**Pin Solder Blocker** -- physically obstructs pin holes in a PCB so you don't solder headers to them (useful for the Pi Zero)
**Pin Header Blocker** -- physically obstructs the physical pins on a header so you can quickly and reliably plug jumper cables into the right spots every time (useful for a full-size Pi). Best printed on a resin printer, but if you choose not to, change the `[Pin_Width]` parameter if you run into issues with the holes being too small.
All variables are at the top and should be rather self-explanatory. Default settings are set up for a Pi Zero and Pi (respectively), but you WILL want to change the `[Open_Pins]` parameter. Any pin listed in that array will be left open. Any pin not in that array will be left blocked off
---
Quick and dirty OpenSCAD model that lets you 3D print a physical obstruction that will do one of two things:
**Pin Solder Blocker** -- physically obstructs pin holes in a PCB so you don't solder headers to them (useful for the Pi Zero)
**Pin Header Blocker** -- physically obstructs the physical pins on a header so you can quickly and reliably plug jumper cables into the right spots every time (useful for a full-size Pi). Best printed on a resin printer, but if you choose not to, change the `[Pin_Width]` parameter if you run into issues with the holes being too small.
All variables are at the top and should be rather self-explanatory. Default settings are set up for a Pi Zero and Pi (respectively), but you WILL want to change the `[Open_Pins]` parameter. Any pin listed in that array will be left open. Any pin not in that array will be left blocked off
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
