pincher Luna

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 112.5x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 3 PETG GEETECH bronze Transmission Distance: 8 PETG JAYO White Transmission Distance: 12This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.88mm) swap to Gray At layer #11 (1.04mm) swap to bronze At layer #13 (1.2mm) suzylem filamentu Petg kingroon