Thingiverse
Pine A64+ Case - VESA mount
di vee_g0rilla
3
Download
1
Likes
0
Makes
Pine A64 computer case, VESA mount
A remix of the Pine A64 case by FrankLumien:
https://www.thingiverse.com/thing:1537631
I made the slot for the SD card read longer for easier access.
I also adjusted the slots on the side to make space for a pine64 with a power button as well as LED lights on the side. As well as space for pine64s with a 5v power cable connector
Use M3x25mm screws (something like these ).
I added an option to have VESA mounting holes on the bottom half to mount the enclosure on the back of a standard 100x100mm or 100x75mm monitor mount.
For ease of assembly, rebore the long holes on the TOP part with a 3.5mm or 4mm bit (9/64" or 5/32"), they might shrink during print.
Print Settings
Printer:
Dremel Idea Builder
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30%
A remix of the Pine A64 case by FrankLumien:
https://www.thingiverse.com/thing:1537631
I made the slot for the SD card read longer for easier access.
I also adjusted the slots on the side to make space for a pine64 with a power button as well as LED lights on the side. As well as space for pine64s with a 5v power cable connector
Use M3x25mm screws (something like these ).
I added an option to have VESA mounting holes on the bottom half to mount the enclosure on the back of a standard 100x100mm or 100x75mm monitor mount.
For ease of assembly, rebore the long holes on the TOP part with a 3.5mm or 4mm bit (9/64" or 5/32"), they might shrink during print.
Print Settings
Printer:
Dremel Idea Builder
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30%
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
