Thingiverse
Pingelin
by kthuen
19
Downloads
13
Likes
0
Makes
Meet Pingelin. A very nice and calm little guy. All he wants is to wander around, thinking, just for himself, confidently nodding his little head.
Pingelin is an advanced print-in-place toy. When you drive him around he will nod with the head, in a beautiful animated manner.
It should be an faily easy print, if your printer is properly calibrated and the filament is of a good quality. There may be two common troubles though: The print may be knoked off the print bed. If so, a great idea would be to use a gluestick and enable z-hop. Another problem that you may encounter, is that, after printing, the wheel is not turning around. This is, almost certainly, due to stringing inside the model. You may be able to remove the strings, carefully, using an exacto knife. But finetuning the printer is probably a better solution.
After printing, you simply need to break off the two built-in supports attached to the base. You may have a look at the video, to see how that is done. It is al
Pingelin is an advanced print-in-place toy. When you drive him around he will nod with the head, in a beautiful animated manner.
It should be an faily easy print, if your printer is properly calibrated and the filament is of a good quality. There may be two common troubles though: The print may be knoked off the print bed. If so, a great idea would be to use a gluestick and enable z-hop. Another problem that you may encounter, is that, after printing, the wheel is not turning around. This is, almost certainly, due to stringing inside the model. You may be able to remove the strings, carefully, using an exacto knife. But finetuning the printer is probably a better solution.
After printing, you simply need to break off the two built-in supports attached to the base. You may have a look at the video, to see how that is done. It is al
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!