Pixel Clock Display

Pixel Clock Display Easy to print, no supports, made to be seen.Print all files preferably from listed below PLA Matte.If You want best effect print grid first 2 layers from white filament and rest in grey.This way grid should not be visible through white diffuser.Grid is made from three parts You can print them all at once for fast printing.If You want better quality print each part separately.Provided files are STEP for better print quality (You need to dissasemble it in slicer) and 3mf already sliced with best settings in Orca Slicer.All parts need to be glued. CA glue is sufficient. First start by assembling diffuser grid together, smaller diffuser grid should be placed in the middle.Arrange two bigger diffusers in a way where grid is touching walls are oriented toward smaller grid.You can place printed parts over LED WS2812B Matrix Display for visual aid before gluing.Second step is assembly of frame, glue it to the diffuser grid.Be careful so glue will not go over small lip going