Thingiverse
Engineering
Zum Modell
Planetary gearbox
14
Downloads
14
Likes
1
Makes
This is my planetary gearbox.
It is one of my first bigger projects and I designed it completely from scratch.
It has a 4:1 reduction from one shaft to the other (and 1:4 vice versa)
The gears have a 1mm module and 23 teeth each. The outer ring has 69 teeth.
I used M6 bolts as shafts since it is just a small toy with no greater purpose.
If you want to modify the design to inculde bearings/bushings or real driveshafts message me and I will send you the Part-Files.
Needed:
2x M6 Bolts
4x M4x16 Bolts
6x M4 Bolts (x16 or longer)
14x M4 Nuts
It is one of my first bigger projects and I designed it completely from scratch.
It has a 4:1 reduction from one shaft to the other (and 1:4 vice versa)
The gears have a 1mm module and 23 teeth each. The outer ring has 69 teeth.
I used M6 bolts as shafts since it is just a small toy with no greater purpose.
If you want to modify the design to inculde bearings/bushings or real driveshafts message me and I will send you the Part-Files.
Needed:
2x M6 Bolts
4x M4x16 Bolts
6x M4 Bolts (x16 or longer)
14x M4 Nuts
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
