Thingiverse
Plate
von Hartgeldgeier
36
Downloads
44
Likes
0
Makes
Timberwork:
I use 54x34x1000 batten for the timberwork. The mahogany coated wood got the used look by a 80 sandpaper. The batten are screwed with four 4x25 spax screws and one 5x70 spax screw per spacer. All in all i use 2 spacer per batten.
The printed parts:
The letters are made of natural PLA and the other parts of black PLA.
Natural filament: http://www.material4print.de/de/pla-filament-kaufen__60/?getProdInfos=100
Electric installation:
The stripes are warm white with 60 led's per meter. They're for 12V but my operate with 7,5V.
The conductors are a sleeved 2x0,75 mm^2. I bought them at aliexpress.com.
Mounting:
For the mounting i used a rope made of natural fibre (sisal).
I use 54x34x1000 batten for the timberwork. The mahogany coated wood got the used look by a 80 sandpaper. The batten are screwed with four 4x25 spax screws and one 5x70 spax screw per spacer. All in all i use 2 spacer per batten.
The printed parts:
The letters are made of natural PLA and the other parts of black PLA.
Natural filament: http://www.material4print.de/de/pla-filament-kaufen__60/?getProdInfos=100
Electric installation:
The stripes are warm white with 60 led's per meter. They're for 12V but my operate with 7,5V.
The conductors are a sleeved 2x0,75 mm^2. I bought them at aliexpress.com.
Mounting:
For the mounting i used a rope made of natural fibre (sisal).
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
