Pokeball

This pokeball is a subscriber recommendation, from our YouTube channel.

The pokeball is made up out of four parts: Top shell, bottom shell, belt and a front knob.

The pokeball is printable without support, but it is a good idea to use a small raft.

We used a bit of costom support on the shells "holes".


Assembling:
Press the shells onto the belt, and glue the knop onto it.
(You can glue the shells on as well)


Slicer settings:
Support - none (we used some costom, but it isn't needed)
Bed adhesion - raft (only 3 mm extra margin is needed)
Speed - 50 mm/s
Walls - 9 (makes the parts solid and concentric)
Layer height - 0.2 mm
Nozzle - 0.4 mm