Pole Mounted Support Platform

Originally designed to allow two emergency strobe lights to be mounted on the top of a pole. It has now expanded to four lights, with the addition of supports struts on the underside of the platform. Five 1/4" (6.35mm) holes on the top surface allow items to be hard mounted to the platform.

V2 fits a pole inner diameter of 1" inch (2.54mm) and has a pole length of 2" inches (50.8mm

V3 expands that diameter to 1.17" (29,72mm) and shortens the center insert to 0.75" (19.05mm) along with filleting the edges.

V4 double the cross section and allows for 4 items to be mounted on top and adds the support struts.

V4_No_Struts is exactly what it sounds like and is the basic four point cross section without the support struts.

All versions do not require support to be printed.

I used Ironing and PLA+ with a 0.4mm nozzle at 215C with a 60C bed temp.