Pox

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can change X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 4.6mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Blue Gray Transmission Distance: 3This print uses 4 unique filaments. Substitute as needed. Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Red At layer #15 (1.28mm) swap to Jade White At layer #21 (1.76mm) swap to Black At layer #33 (2.72mm) swap to Blue Gray At layer #40 (3.28mm) swap to Jade White for the rest.