Predator Hueforge

Project: predator 200x200.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.7mm and the Actual Depth is 2.8mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5 PLA+ Sunlu Red Transmission Distance: 6This print uses 4 unique filaments Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Grey At layer #9 (0.8mm) swap to White At layer #17 (1.44mm) swap to Black At layer #21 (1.76mm) swap to Red At layer #31 (2.56mm) swap to White for the rest.