Predator Hueforge - Warning Predator

Project: Predator Danger.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 201.26x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Black Transmission Distance: 0.6 PLA Red Transmission Distance: 4 PLA White Transmission Distance: 5 PLA Yellow Transmission Distance: 5.5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #14 (1.2mm) swap to White At layer #16 (1.36mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest. You can increase the size but you must not increase the Z, only the X and Y.