primavera

Project: primavera.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.4mm and the Actual Depth is 1.4mmFilaments Used: PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Sakura Pink At layer #8 (0.72mm) swap to Ice Blue At layer #10 (0.88mm) swap to CharcoalWARNING: This Slider is at the same Layer as the Next Slider At layer #11 (0.96mm) swap to Ivory White for the rest.