[print settings] Easy separate support interface

Tuned support interface settings for stacking flat-ish models like MultiBoard core tiles. Download the .3mf print profile and save the settings to your preferred Bambu Studio presets. This profile makes use of the material properties of PLA and PETG; they don't stick to each other particularly well when cool. So if you have large, flat prints that take up the majority of your print bed, you can use these settings to print a stack of them instead of having to do multiple prints. I have used these settings to print MultiBoard tiles in batches of 3 and 6 with great results, as you can see here → You have to manually move the objects in the slicer so that they are separated by two layers. If you're printing with a .2mm layer height, then the objects need to be .4mm apart. I have set the flush volumes to 700 in this profile, which is overly cautious. I've tried with 200 and it has worked just fine. Your mileage may vary. This profile assumes that you are printing models in PETG,