Slicer Discord
Project Jackal  – 3D-Druckmodell von Thingiverse Thingiverse

Project Jackal

4 Downloads
12 Likes
0 Makes
Zum Modell
Electrically Fired 40mm Off Route,Anti Vehicle Mine (Airsoft/paintball/milsim)
Build Videos https://www.youtube.com/watch?v=CfQXzIoD6CU&list=PLPpNdK3QZgNonZ14aRyh_z-NAgCNr8fZ9
Tools
Flat head screwdriver
Micro flat head screwdriver
Drill with ¼” bit

Parts to buy
1 “universal 12v car door lock actuator” $5
1 RF 12v remote switch $15 (optional)
1 ESP32 CAM+ESP32-CAM-MB Micro USB to Serial Port CH340G base+OV2640 Camera Module buy as a package deal $10 (optional)

10” 1.5” SCH 40 PVC pipe, you can go bigger for an insurgent 107mm rocket type system (Ie hooked up to a kitchen timer and set to fire on a FOB) 18-24” will get you 100yards + on a warm day shooting propane with a PB4 and a M-29 and some were around 500’ with a TAGINN shell and a M-29
One 1.5”X1.25” rubber coupling (Home Depto SKU # 320518) $9
Two ¼”X1.5” bolts for the bipod legs
One ¼”x2” bolts for the back leg
Three ¼”wingnuts
Two ¼” washers for the bipod legs

40mm gas shell- a “big hole” type is prefe
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Carbon Fiber
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen