PTFE guide mount

This is a simple PTFE tube guide for max of 5 tubes, that can be mounted to anything with doublesided tape or with small screws. There are 4 print profiles provided:loose fit for PTFE tubes with numbers - inner diameter of the guide hole is 5mm, PTFE moves freelytight fit for PTFE tubes with numbers - scaled down to 85% to fit my tubes tightly - my tubes are approx. 4.3mm in diameter, the inner diameter of the guide hole is approx 4.2mm, so it holds it tightly, but you can still easily push the tube in2x profiles same as the above, just without numbers 100% size (loose fit profiles) dimensions are: 8mm (depth) x 70mm (width) x 13mm (height)