PullStruder M1.2

The goal of this project was to create a machine that can recycle PET bottles into filament!Build Tutorial: https://youtu.be/HL32tasaQk8 Tips and Tricks: https://youtu.be/Bi2J-lV_peMParts List1.75mm Drill Bit: https://amzn.to/3QP1AULSilicone Glue: https://amzn.to/3G7ZPNLHeater Block and Nozzle: https://amzn.to/3Tb5o5RPower Cord: https://amzn.to/47U2ZAWHeating Element: https://amzn.to/3MROO6QAC to DC Converter: https://amzn.to/3RhbLlnMotor Controller: https://amzn.to/3STOngaMotor: https://amzn.to/416dmiB1.5in Corner Bracket - https://amzn.to/489lKQk10 - M3 x 8 mm Screws3 - M3 x 20mm Screws1 - M3 x 40mm ScrewM3 Nuts, washers, lock washersNow that you turned a bottle into filament its time to start printing. In my experience PET is actually a very friendly filament if you print slow and hot. I would recommend using an all metal hotend, as PTFE lined hotends will start to fail around 250C.Settings:267C nozzle80C bed40mm/s max printing speedAt least 20% Gyroid Infill1 mm @ 60mm/s retraction