Pumpkin Pot

by CalebTimoteo · Household

163 Downloads

68 Likes

0 Makes

Go to Model

I printed these pots with a 0.8mm Nozzle and 0.4, 0.48, 0.6 & 0.64mm layer height Also printed one with 0.4mm nozzle 0.28mm layer height and it took 8 hours The “Spiral Mode” one creates some tiny hole at the bottom but they are okay for a planter Use support at the bottom for a better print Scale it as you like :) happy fall season

CalebTimoteo also publishes on

453 additional models across 1 more platforms

Printables

453 models

♥ 94,043 ↓ 291,496 ⚒ 1,929

Frequently Asked Questions

Which 3D printer is suitable for Pumpkin Pot?

Any FDM printer should handle Pumpkin Pot just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Pumpkin Pot need supports when printing?

No supports needed for Pumpkin Pot — it's designed to print clean off the bed.

How long does it take to print Pumpkin Pot?

According to the design notes, Pumpkin Pot takes approximately 8 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Pumpkin Pot available in?

Pumpkin Pot is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerOnline.

Is Pumpkin Pot free to download?

Yes, Pumpkin Pot is available as a free download through MakerOnline. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Pumpkin Pot

Similar Models

Add to Collection