PumpkinHead

My Frist Hueforge and did this for a friend that loves PumpkHead. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 193.06x246.74mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.7mm and the Actual Depth is 2.8mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 7This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #16 (1.36mm) swap to Brown At layer #21 (1.84mm) swap to Orange for the rest.